Dutton-Lainson Company

Similar to 25019, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

1500 lb brake winch for industrial use. Extra heavy duty construction for long life. Gear cover enclosed braking mechanism, 2-1/2 inch reel hub diameter. Load locks in place when handle is released. Great for grain augers, boat lifts, pickup cranes, etc. Lift and lower with ease. 150 pound minimum load required for winch to function properly. Powder coated copper bronze finish. Handle included. NOTE: For boat lift applications, handle may be replaced by large wheel (supplied by lift manufacturer).

CSA APPROVED 120 Volt Electric Winch with factory-installed remote control (handheld pendant switch with 10 ft cord) has 10 ft, 3-wire grounded cord. 2700 lb capacity. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 25 ft of 7/32 inch aircraft cable. Emergency crank handle also included in case of power loss. Similar to SA9015, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

10-micron WATER-BLOCK replacement canister for model 596 fuel filter.

Similar to 25021, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

10 micron BiO-FLO replacement canister for model 597 fuel filter. For filtering biodiesel fuels.

2500 lb brake winch for industrial use. Extra heavy duty construction for long life. Gear cover enclosed braking mechanism, 1-5/16 inch reel hub diameter. Load locks in place when handle is released - lift and lower with ease. Great for grain augers, boat lifts, pickup cranes, etc. 300 pound minimum load required for winch to function properly. Powder coated black reel, zinc TUFFPLATE base and hardware. Handle included. NOTE: For boat lift applications, handle may be replaced by large wheel (supplied by lift manufacturer).

For use on tilt-bed medium and light-duty PWC, snowmobile, and utility trailers. Automatic latch holds tilt bed securely in place. Spring loaded non-pinching latch for automatic latching and easy release. Hardened latch bars for increased strength. Zinc TUFFPLATE finish.

1800 lb winch for horizontal pulling applications. High carbon steel gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Zinc TUFFPLATE finish. Handle included.

2500 lb bolt-on drop leg jack with hardware, side wind, plated finish. For tongues up to 3 x 5 in. Imported, tested to D-L standards.

Plastic top cap, fits jacks with 2-1/4 inch diameter outer tube. (6600-series ag/industrial jacks and 6800-series marine jacks).

Model 6670B A-frame jack, 2000 lb, includes support bracket for added stability (support bracket welds to underside of trailer). Jack can be welded or bolted to standard A-frame couplers. Powder coated black finish. Removable wheel or foot sold separately.

1/2 inch cable fastener fits DL1602A-DL3500 pulling winches, B1500-B3503 and DLB1200A-DLB2500A brake winches. Works with 1/4, 9/32, or 5/16 inch cable.

Zinc die-cast top cap with 1 inch NPT pipe fittings. For use with models 595 and 596 fuel filters only.

Quick mount kit provides quick, easy installation and removal of your StrongArm electric winch. Includes 3 shoulder studs and nuts, plus 3/8 inch bolt, lock washer and wing nut.

Plastic top cap for the DLx-P tongue jack. Includes screw to secure top cap in place.

1800 lb winch for horizontal pulling applications. High carbon steel gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Powder coated copper bronze finish. Handle included.

Plastic top cap for the DLx-SF and DLx-SW tongue jacks. Includes screw to secure top cap in place.

2500 lb brake winch for industrial use. Extra heavy duty construction for long life. Gear cover enclosed braking mechanism, 2-1/2 inch reel hub diameter. Load locks in place when handle is released. Great for grain augers, boat lifts, pickup cranes, etc. Lift and lower with ease. 300 pound minimum load required for winch to function properly. Powder coated black reel, zinc TUFFPLATE base and hardware. Handle included. NOTE: For boat lift applications, handle may be replaced by large wheel (supplied by lift manufacturer).

Gear and bearing kit for jacks up to 1250 lb. capacity with 2 inch outer tube with date code after 3397 (week 33 of 1997).

Model 6671 A-frame jack, 5000 lb. Can be welded or bolted to standard A-frame couplers. Powder coated black finish. Removable wheel or foot sold separately.

Heavy 3/8 x 4 x 8 inch steel plate with quick mount studs for mounting StrongArm electric winches on narrow trailer winch stands. Fits all StrongArm SA and TW series winches. Quick mount studs allow easy removal of winch. Zinc TUFFPLATE finish.

12 Volt Electric Winch is powered by your vehicle battery, using wiring harness (included). Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 7/32 aircraft cable, pulley block and snap hook. 4500 lb load capacity when double-lined. Emergency crank handle also included in case of power loss. DC Winches are great for mobile applications, or around water. Mount on ATV’s; Race car trailers (also for moving extra tires); Antique car trailers; Boat trailers; Hay bale moving; Livestock feeding equipment; Large livestock trailers; Boat lifts; Articulating conveyors. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Zinc die-cast top cap with 3/4 inch NPT pipe fittings. For use with model 595 or 596 only.

7 inch handle, standard replacement for DL600A, DL900A, DL1100A, DL1300A, WG1500 and WG2000. Ergonomic handle grip.

Similar to 24874, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

7 inch black plated handle, standard replacement for models DLx1200 and DLx1200FC. Can also be used on models DL600A, DL900A, DL1100A, DL1300A, WG1500, and WG2000. Premium cushion handle grip is softer and more comfortable.

2500 lb brake winch for industrial use. Extra heavy duty construction for long life. Gear cover enclosed braking mechanism, 3-1/8 inch reel hub diameter. Load locks in place when handle is released. Great for grain augers, boat lifts, pickup cranes, etc. Lift and lower with ease. 300 pound minimum load required for winch to function properly. Powder coated black reel, zinc TUFFPLATE base and hardware. Handle included. NOTE: For boat lift applications, handle may be replaced by large wheel (supplied by lift manufacturer).

Model 6671B A-frame jack, 5000 lb, includes support bracket for added stability (support bracket welds to underside of trailer). Jack can be welded or bolted to standard A-frame couplers. Powder coated black finish. Removable wheel or foot sold separately.

Used for mounting StrongArm electric winches to trailer winch stands where insufficient room and improper angle are present. Powder coated black finish. Hardware included.

12 Volt Electric Winch with factory-installed remote (handheld pendant switch with 10 ft cord) is powered by your vehicle battery, using wiring harness (included). Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 7/32 aircraft cable, pulley block and snap hook. 4500 lb load capacity when double-lined. Emergency crank handle also included in case of power loss. DC Winches are great for mobile applications, or around water. Mount on ATV’s; Race car trailers (also for moving extra tires); Antique car trailers; Boat trailers; Hay bale moving; Livestock feeding equipment; Large livestock trailers; Boat lifts; Articulating conveyors. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

9-1/2 inch replacement handle for DL1402A. Can also replace 6307. Ergonomic handle grip.

Similar to 25040, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: Maximum run time 4 minutes. See owners manual for more details.

9-1/2 inch black plated handle, standard replacement for models DLx1500 and DLx1500FC. Can also replace 6307. Premium cushion handle grip is softer and more comfortable.

2000 lb 2-speed winch for horizontal pulling applications. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, for heavier loads. Zinc TUFFPLATE finish. Handle included.

Gear and bearing kit for jacks up to 1000 lb. capacity with 2 inch outer tube with date code between 4296 (week 42 of 1996) and 3397 (week 33 of 1997).

Ball adapter plate for instant mounting of StrongArm electric winch models SA5000, SA7000, SA9000, and SA12000 on vehicle ball hitch. Bolt plate to winch, then slip pear-shaped cutout over any standard front or rear-mounted 1-7/8" or 2" hitch ball. Keyhole allows quick installation and removal. Zinc TUFFPLATE finish.

3500 lb brake winch for industrial use. Extra heavy duty construction for long life. Gear cover enclosed braking mechanism, 3-1/8 inch reel hub diameter. Load locks in place when handle is released. Great for grain augers, boat lifts, pickup cranes, etc. Lift and lower with ease. 500 pound minimum load required for winch to function properly. Powder coated black reel, zinc TUFFPLATE base and hardware. Handle included. NOTE: For boat lift applications, handle may be replaced by large wheel (supplied by lift manufacturer).

120 Volt Electric Winch has 10 foot, 3 wire grounded power cord. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 7/32 aircraft cable, pulley block, and snap hook. 4000 lb capacity when double-lined. Emergency crank handle also included in case of power loss. For applications with access to AC power: Boat lifts; Boat davits; Frame-straightening machines (to pull disabled vehicles up onto machine); Light towers; Marine railway systems; Greenhouse ventilation systems; Aircraft hangars (to pull small aircraft in and out); Opening/closing large horizontal sliding doors; Dumb waiters; General material handling applications. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

9-1/2 inch offset replacement handle for DL1602A, DL1802A and DLC1800. Ergonomic handle grip.