Dutton-Lainson Company
A Dependable Company Since 1886
View Cart (
0
)
Your shopping cart is currently empty
Close
MENU
MENU
Products
Couplers
Couplers & Accessories
Coupler Balls
Fencing Tools
Fuel Tank Filters
Oilers
Heavy Duty Pump Oilers
Industrial Pump Oilers
Pistol Pump Oilers
Spray Tip Oilers
Spring Bottom Oilers
Spouts
Tongue Jacks
Accessories & Parts
Ag-Industrial Jacks
Marine Jacks
Trailer
Accessories
Roller Bunks
Wheel Bearings & Protectors
Winches
Brake Winches
Hand Winch Accessories
Electric Winches
Electric Winch Accessories
Pulling Winches
Worm Gear Winches
Deals
Repair Parts
Brake Winches
Electric Winches
Pulling Winches
Tongue Jacks
Worm Gear Winches
Support
Product Videos
D-L Difference Videos
FAQ Videos
Step-By-Step Videos
Troubleshooting Guides
FAQs
Specifications & Model Comparisons
Electric Winch Repair Service
Product Warranties
Return Policy
Contact Us
Order Status
Home
» All Products
Filter by Price
Price Range
Under $100
$100 - $200
$200 - $300
$300 - $400
$400 - $500
$500 - $600
$600 - $700
$700 - $800
«
Previous
...10
11
12
13
14
Next
»
1
of 2
SA12000AC Electric Winch | No Clutch | No Remote
Price
$699.99
1
of 2
Part Number
24947
SA12000AC Electric Winch | No Clutch | No Remote
Similar to 24876, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$699.99
B4010A Ceiling Brake Winch | Plated
Price
$352.99
Part Number
11140
B4010A Ceiling Brake Winch | Plated
Designed for ceiling mount applications. 4000 lb rated capacity. Loop drive, for use with shepards hook, often powered by electric drill. Split reel allows for pulling of 2 cables in opposite directions. Zinc TUFFPLATE finish.
Price
$352.99
1
of 3
DL2000A Pulling Winch | Bronze | 2-Speed
List Price:
$157.99
Price
$126.99
1
of 3
Part Number
14700
DL2000A Pulling Winch | Bronze | 2-Speed
2000 lb 2-speed winch for horizontal pulling applications. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, for heavier loads. Powder coated copper bronze finish, zinc TUFFPLATE hardware. Handle included.
Price
$126.99
1
of 2
SA12000AC Electric Winch | Clutch | No Remote |CSA
Price
$758.99
1
of 2
Part Number
24960
SA12000AC Electric Winch | Clutch | No Remote |CSA
CSA APPROVED 120 Volt Electric Winch has 10 foot, 3-wire grounded power cord. 4000 lb capacity. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 7/32 aircraft cable, pulley block, and snap hook. 4000 lb capacity when double-lined. Emergency crank handle also included in case of power loss. Similar to SA12000AC, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$758.99
1
of 4
6319X Pulling Winch Handle | 9-1/2 in.
Price
$18.99
1
of 4
Part Number
70386
6319X Pulling Winch Handle | 9-1/2 in.
9-1/2 inch offset black plated handle, standard replacement for models DLx1900, DLx1900FC, DLx2300, and DLx2300FC. Can also be used on models DL1602A and DL1802A. Premium cushioned handle grip is softer and more comfortable.
Price
$18.99
1
of 8
DL2000AB Pulling Winch | Plated | 2-Speed | Brake
List Price:
$171.99
Price
$137.99
1
of 8
Part Number
14730
DL2000AB Pulling Winch | Plated | 2-Speed | Brake
2000 lb 2-speed winch for horizontal pulling applications, with hand brake for manually-controlled load release. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, requiring less effort. Zinc TUFFPLATE finish. Handle included.
Price
$137.99
1
of 7
7100 Kayak Kaddy
List Price:
$49.99
Price
$24.99
1
of 7
Part Number
22191
7100 Kayak Kaddy
Moving your kayak to and from the water has never been easier than with the Dutton-Lainson 7100 Kayak Kaddy. This kit includes an axle, two wheels, two washers, two cotter pins, and three adjustable straps, which allow a snug fit to all kayaks. It assembles and disassembles in seconds, and it can be stored in the hull of the kayak when not in use. Attach the kit to one end of your kayak, then pull it from the other end.
Price
$24.99
6813A Jack Miter Gear Kit | 1,250-2,000 lb. Jacks
Price
$13.99
Part Number
22439
6813A Jack Miter Gear Kit | 1,250-2,000 lb. Jacks
Gear and bearing kit for jacks 1250 lb to 2000 lb capacity with 2-1/4 inch outer tube with date code after 4296 (week 42 of 1996)
Price
$13.99
1
of 4
SA12015AC Electric Winch | Clutch | Remote
Price
$734.99
1
of 4
Part Number
25046
SA12015AC Electric Winch | Clutch | Remote
120 Volt Electric Winch with factory-installed remote control (handheld pendant switch with 10 ft cord) has 10 foot, 3 wire grounded power cord. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 7/32 aircraft cable, pulley block, and snap hook. 4000 lb capacity when double-lined. Emergency crank handle also included in case of power loss. For applications with access to AC power: Boat lifts; Boat davits; Frame-straightening machines (to pull disabled vehicles up onto machine); Light towers; Marine railway systems; Greenhouse ventilation systems; Aircraft hangars (to pull small aircraft in and out); Opening/closing large horizontal sliding doors; Dumb waiters; General material handling applications. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as its reeled in, and any frayed strands can cause cuts. -protects cable, so its not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winchs spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$734.99
6459 Ratcheting Pulling Winch Handle | 8-1/4 in.
Price
$36.99
Part Number
70371
6459 Ratcheting Pulling Winch Handle | 8-1/4 in.
Ratcheting handle for DL1602A, DL1802A and DLx1900 pulling winches. Can be cranked in full circular revolutions. Can also be ratcheted for better leverage on steep boat ramps or from an awkward stance (such as trying to bring a boat in without getting your feet wet!). See video link on this page for a demonstration of how it works.. Note: Ratcheting action only works in one direction (pulling the line in), so this item needs to be used in applications where there is room to rotate the handle 360 degrees, in order to let the load out.
Price
$36.99
1
of 8
SA12015AC Electric Winch | No Clutch | Remote
Price
$734.99
1
of 8
Part Number
25047
SA12015AC Electric Winch | No Clutch | Remote
Similar to 25046, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$734.99
6511 Wheel Bearing Seals and Cotter Pins
Price
$10.99
Part Number
21880
6511 Wheel Bearing Seals and Cotter Pins
Replacement seals and cotter pins for 6202, 6203, 6205, 6502, 6503 and 6505 wheel bearing sets (1-1/16 inch spindle, 1.98 inch hub).
Price
$10.99
6813XS Jack Miter Gear Kit | DLx-SF and DLx-SW
Price
$15.99
Part Number
22332
6813XS Jack Miter Gear Kit | DLx-SF and DLx-SW
Gear and bearing kit for the DLx-SF and DLx-SW tongue jacks.
Price
$15.99
1
of 3
SA12015AC Electric Winch | Clutch | Remote | CSA
Price
$789.99
1
of 3
Part Number
24962
SA12015AC Electric Winch | Clutch | Remote | CSA
CSA APPROVED 120 Volt Electric Winch with factory-installed remote control (handheld pendant switch with 10 ft cord) has 10 foot, 3-wire grounded power cord. 4000 lb capacity when double-lined with pulley block and hook (included). Comes loaded with 50 ft of 7/32 inch aircraft cable. Power in, power out, controlled freewheeling clutch, and automatic brake. Emergency crank handle also included in case of power loss. Similar to SA12015AC but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$789.99
6512 Wheel Bearing Seals and Cotter Pins
Price
$10.99
Part Number
21881
6512 Wheel Bearing Seals and Cotter Pins
Replacement seals and cotter pins for 6204, 6206, 6504 and 6506 wheel bearing sets (1-1/4 inch spindle, 2.328 inch hub).
Price
$10.99
1
of 3
SA12015AC Electric Winch | No Clutch | Remote |CSA
Price
$789.99
1
of 3
Part Number
24963
SA12015AC Electric Winch | No Clutch | Remote |CSA
Similar to 24962, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$789.99
6513 Wheel Bearing Seals and Cotter Pins
Price
$10.99
Part Number
21882
6513 Wheel Bearing Seals and Cotter Pins
Replacement seals and cotter pins for 6207, 6208, 6507 and 6508 wheel bearing sets (1-3/8 inch spindle, 2.561 inch hub).
Price
$10.99
6514 Wheel Bearing Seals and Cotter Pins
Price
$10.99
Part Number
21883
6514 Wheel Bearing Seals and Cotter Pins
Replacement seals and cotter pins for 6200 and 6500 wheel bearing sets (3/4 inch spindle, 1.781 inch hub).
Price
$10.99
6515 Wheel Bearing Seals and Cotter Pins
Price
$10.99
Part Number
21884
6515 Wheel Bearing Seals and Cotter Pins
Replacement seals and cotter pins for 6201 and 6501 wheel bearing sets (3/4 inch spindle, 1.938 inch hub).
Price
$10.99
DLC2500 Pulling Winch | Plated | 2-Speed
Price
$171.99
Part Number
14825
DLC2500 Pulling Winch | Plated | 2-Speed
2500 lb 2-speed winch for horizontal pulling applications. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, for heavier loads. Zinc TUFFPLATE finish. Handle included.
Price
$171.99
6612 Jack Bottom Support Plate | 6670s and 6671s
Price
$4.99
Part Number
22763
6612 Jack Bottom Support Plate | 6670s and 6671s
Bottom support plate for A-frame jacks. Unfinished, ready to be welded to underside of trailer. Provides extra support, so jack will not lean under load.
Price
$4.99
1
of 8
TW4000 DC Electric Winch | Clutch | No Remote
Price
$419.99
1
of 8
Part Number
25200
TW4000 DC Electric Winch | Clutch | No Remote
1500 lb DC winch for boat trailer use - for boats up to 4000 lbs. Loaded with 2 inch x 20 foot web strap and snap hook. Power-in and free-wheel operation, with positive mechanical brake. Clutch control knob engages gears or releases load in a controlled freewheel mode. Note: In the event of a power loss, this model can be manually operated by using a 5/8 inch socket wrench. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$419.99
1
of 8
6322 Quick-Attach Pulling Winch Handle | 9-1/2 in.
Price
$20.99
1
of 8
Part Number
70330
6322 Quick-Attach Pulling Winch Handle | 9-1/2 in.
9-1/2 inch Quick-Attach replacement handle (no nut required). For DL1602ADD, DL1800A, DL2000A, DL2500A, DL3200A, DL3500B, and DLB1550A.
Price
$20.99
1
of 2
DL2500A Pulling Winch | Plated | 25 ft. Strap
List Price:
$186.99
Price
$149.99
1
of 2
Part Number
14846
DL2500A Pulling Winch | Plated | 25 ft. Strap
2500 lb 2-speed winch for horizontal pulling applications, with 25 ft strap installed. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, for heavier loads. Zinc TUFFPLATE finish. Handle included.
Price
$149.99
1
of 2
TW4015 DC Electric Winch | Clutch | Remote
Price
$524.99
1
of 2
Part Number
25211
TW4015 DC Electric Winch | Clutch | Remote
1500 lb DC winch for boat trailer use, with factory-installed remote control (handheld pendant switch with 10 ft cord) for boats up to 4000 lbs. Loaded with 2 inch x 20 ft web strap and snap hook. Power-in and free-wheel operation, with positive mechanical brake. Clutch control knob engages gears or releases load in a controlled freewheel mode. Note: In the event of a power loss, this model can be manually operated by using a 5/8 inch socket wrench. NOTE: Maximum run time 4 minutes. See owners manual for more details.
Price
$524.99
1
of 3
DL2500A Pulling Winch | Ice Fishing Houses | Right
List Price:
$176.99
Price
$141.99
1
of 3
Part Number
15431
DL2500A Pulling Winch | Ice Fishing Houses | Right
2500 lb 2-speed special winch used on ice fishing houses. Right- hand drive, plated finish, 6 inch handle. Individually boxed.
Price
$141.99
1
of 3
DL2500A Pulling Winch | Bronze | 2-Speed
List Price:
$169.99
Price
$135.99
1
of 3
Part Number
14800
DL2500A Pulling Winch | Bronze | 2-Speed
2500 lb 2-speed winch for horizontal pulling applications. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, for heavier loads. Powder coated copper bronze finish, zinc TUFFPLATE hardware. Handle included.
Price
$135.99
6331 Grease Keeper Caps | 3/4 in.
Price
$20.99
Part Number
21841
6331 Grease Keeper Caps | 3/4 in.
3/4 inch Grease Keeper dust caps with grease zirk and pressure relief valve. Protects wheel bearings from water and dirt with a positive hub seal. Supplies a reserve of lubrication and has built-in positive relief. Longer time between periodic repacking of bearings. Protects and extends bearing life. Zirk permits frequent greasing and relief valve eliminates excess pressure on grease seal. No complicated moving parts or gaskets that require costly maintenance and replacements. Easily installed in seconds, no need to remove hubs. A positive hub seal minimizes water entry when wheels are submerged. Zinc plated finish. Includes two protectors, each with a vinyl cover.
Price
$20.99
1
of 2
6804 Bolt-On Mounting Hardware | Marine Jacks
Price
$13.99
1
of 2
Part Number
22443
6804 Bolt-On Mounting Hardware | Marine Jacks
Mounting hardware for D-L tongue jacks. Fits square tongues up to 3 x 5 inches.
Price
$13.99
1
of 8
TW9000 DC Electric Winch | Clutch | No Remote
Price
$639.99
1
of 8
Part Number
25215
TW9000 DC Electric Winch | Clutch | No Remote
3000 lb DC winch designed for vehicle/boat trailer use. For boats up to 9000 lbs. Built to same high quality standards as regular SA-series StrongArm winches, but loaded with 2 inch by 20 foot web strap and hook. Power-in, power-out and freewheel operation with dynamic brake and mechanical friction brake. Includes emergency crank handle in case of power loss. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.
Price
$639.99
1
of 2
TW9015 DC Electric Winch | Clutch | Remote
Price
$744.99
1
of 2
Part Number
25220
TW9015 DC Electric Winch | Clutch | Remote
3000 lb 12V DC winch with factory-installed remote control (handheld pendant switch with ten ft cord) for boat trailer use. For boats up to 9000 lbs. Built to same high quality standards as regular SA-series StrongArm winches, but loaded with 2 inch x 20 foot web strap and hook. Power-in, power-out and freewheel operation, with dynamic brake as well as mechanical friction brake. Includes emergency crank handle in case of power loss. NOTE: Maximum run time 4 minutes. See owners manual for more details.
Price
$744.99
6804XS Bolt-On Mounting Hardware | DLx-SF & DLx-SW
Price
$41.99
Part Number
303899
6804XS Bolt-On Mounting Hardware | DLx-SF & DLx-SW
Mounting hardware for the DLx-SF and DLx-SW tongue jacks. Fits square tongues up to 3 x 5 inches.
Price
$41.99
1
of 3
DL2500AB Pulling Winch | Plated | 2-Speed | Brake
List Price:
$181.99
Price
$145.99
1
of 3
Part Number
14830
DL2500AB Pulling Winch | Plated | 2-Speed | Brake
2500 lb 2-speed winch for horizontal pulling applications, with hand brake for manually-controlled load release. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, requiring less effort. Zinc TUFFPLATE finish. Handle included.
Price
$145.99
6332 Grease Keeper Caps | 1 in. and 1-1/16 in.
Price
$20.99
Part Number
21842
6332 Grease Keeper Caps | 1 in. and 1-1/16 in.
1 inch Grease Keeper dust caps with grease zirk and pressure relief valve. Protects wheel bearings from water and dirt with a positive hub seal. Supplies a reserve of lubrication and has built-in positive relief. Longer time between periodic repacking of bearings. Protects and extends bearing life. Zirk permits frequent greasing and relief valve eliminates excess pressure on grease seal. No complicated moving parts or gaskets that require costly maintenance and replacements. Easily installed in seconds, no need to remove hubs. A positive hub seal minimizes water entry when wheels are submerged. Zinc plated finish. Includes two protectors, each with a vinyl cover. Also fits 1-1/16 inch spindles.
Price
$20.99
1
of 4
6819 Extension Kit for Bolt-On Mounting Hardware
Price
$15.99
1
of 4
Part Number
22659
6819 Extension Kit for Bolt-On Mounting Hardware
This kit allows you to mount your D-L tongue jack to a square tongue up to 3 x 6 inches. Simply attach the kit to the mounting plate on your jack, then use the bolts that were included with the jack to mount it to the tongue. The series of photos above show what is included, and how to install the extender kit.
Price
$15.99
1
of 8
6450 DLB-Series Brake Winch Handle | 7 in.
Price
$15.99
1
of 8
Part Number
70306
6450 DLB-Series Brake Winch Handle | 7 in.
7 inch replacement handle for DLB350A, DLB800A and DLB1200A brake winches. Ergonomic handle grip.
Price
$15.99
1
of 3
DL2500AB Pulling Winch | Bronze | 2-Speed | Brake
List Price:
$179.99
Price
$143.99
1
of 3
Part Number
14875
DL2500AB Pulling Winch | Bronze | 2-Speed | Brake
2500 lb 2-speed winch for horizontal pulling applications, with hand brake for manually-controlled load release. High carbon steel, heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, requiring less effort. Powder coated copper bronze finish, zinc TUFFPLATE hardware. Handle included.
Price
$143.99
6333 Grease Keeper Caps | 1-1/4 in.
Price
$20.99
Part Number
21843
6333 Grease Keeper Caps | 1-1/4 in.
1-1/4 inch Grease Keeper dust caps with grease zirk and pressure relief valve. Protects wheel bearings from water and dirt with a positive hub seal. Supplies a reserve of lubrication and has built-in positive relief. Longer time between periodic repacking of bearings. Protects and extends bearing life. Zirk permits frequent greasing and relief valve eliminates excess pressure on grease seal. No complicated moving parts or gaskets that require costly maintenance and replacements. Easily installed in seconds, no need to remove hubs. A positive hub seal minimizes water entry when wheels are submerged. Zinc plated finish. Includes two protectors, each with a vinyl cover.
Price
$20.99
1
of 2
6608 Wheel Lock | Marine Jacks
Price
$8.99
1
of 2
Part Number
22547
6608 Wheel Lock | Marine Jacks
Wheel lock fits 800 and 1000 lb. D-L jacks with 6 inch wheel. Grips wheel to eliminate wheel roll. Step on one end to lock, opposite end to release. Kit includes locking lever, cam and mounting bolt.
Price
$8.99
1
of 4
6451 DLB-Series Brake Winch Handle | 9-3/8 in.
Price
$15.99
1
of 4
Part Number
70310
6451 DLB-Series Brake Winch Handle | 9-3/8 in.
9-3/8 replacement handle for DLB1500A, DLB2000A and DLB2500A brake winches. Ergonomic handle grip.
Price
$15.99
«
Previous
...10
11
12
13
14
Next
»
Our Products
Couplers & Coupler Balls
» Couplers & Accessories
» Coupler Balls
Fencing Tools
Fuel Tank Filters
Oil Cans
» Heavy Duty Pump Oilers
» Industrial Pump Oilers
» Pistol Pump Oilers
» Spray Tip Oilers
» Spring Bottom Oilers
» Spouts
Tongue Jacks
» Accessories and Parts
» Ag-Industrial Jacks
» Marine Jacks
Trailer Accessories & Roller Bunks
» Accessories
» Roller Bunks
Wheel Bearings & Protectors
Winches
» Brake Winches
» Hand Winch Accessories
» Electric Winches
» Electric Winch Accessories
» Pulling Winches
» Worm Gear Winches
Repair Parts
» Brake Winches - Repair Parts
» Electric Winches - Repair Parts
» Pulling Winches - Repair Parts
» Tongue Jacks - Repair Parts
» Worm Gear Winches - Repair Parts
Deals