Dutton-Lainson Company

Have you ever tried moving a trailer by holding onto the tongue? Coupler grip provides an easier, cleaner, and safer way to guide trailer tongue to and from hitch ball. Fits 1-7/8 and 2 inch couplers by bolting into the side, with universal mounting holes for all Class 1, 2, or 3 couplers. Ideal for personal watercraft and other lightweight trailers. Designed for 3/8 or 1/2 inch bolts. Zinc plated TUFFPLATE finish with large, comfortable hand grip.

1400 lb winch for horizontal pulling applications. High carbon steel gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Zinc TUFFPLATE finish. Handle included.

Brake winch safety and rugged construction at a more economical price. Raise and lower loads with minimal effort, with load locked in place, even when handle is released. 2500 lb capacity, zinc TUFFPLATE finish. 175 lb minimum load required for winch to operate properly. Handle included.

Model 6345 8 in. Keel Roller - Fits 5/8 Shaft

1-3/8 x 1-1/16 inch spindle O.D., 1.98 outer hub I.D. Cone nbr L44649/L68149, cup nbr L44610/L68110. Includes 2 bearings with races, 1 grease seal, and cotter pin. IMPORTED.

U-bolt style bracket with extra length to allow handling of wide tires and to fit wide tongues. For 8", 9", or 12" wheels. Fits 4 or 5-hole rims, zinc TUFFPLATE finish. Nuts also included.

Removable wheel, fits model 6418 jack only. Includes quick-attach pin for easy removal. 1000 lb capacity. Zinc TUFFPLATE finish.

Features heavy-duty 8 inch slotted independent wheel with bearing, to maneuver over rough terrain when moving trailer manually. Reinforced wheel bracket also adds strength. 4-bolt swivel mounting system for heavier applications. Zinc TUFFPLATE finish. 1500 lb capacity. Fits tongues up to 3 x 5 inches.

15 foot heavy duty winch strap with hook, with breaking strength of 6600 lbs, for winches up to 3700 lbs (strap rating must be 150% of winch rating). 2 inch width. Mounting hardware included.

CSA APPROVED 120 Volt Electric Winch has 10 foot, 3-wire grounded power cord. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 3/16 aircraft cable, pulley block, and snap hook. 1800 lb capacity when double-lined. Emergency crank handle also included in case of power loss. Similar to SA7000AC, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

1400 lb winch with 20 ft strap installed, for horizontal pulling applications. High carbon steel gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Zinc TUFFPLATE finish. Handle included.

Brake winch safety and rugged construction at a more economical price. Raise and lower loads with minimal effort, with load locked in place, even when handle is released. 2500 lb capacity, powder coated copper bronze finish. 175 lb minimum load required for winch to operate properly. Handle included.

Model 6346 12 in. Keel Roller - Fits 5/8 Shaft

120 Volt Electric Winch with factory-installed remote control (handheld pendant switch with 10 ft cord) has 10 foot, 3 wire grounded power cord. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 3/16 aircraft cable, pulley block, and snap hook. 1800 lb capacity when double-lined. Emergency crank handle also included in case of power loss. For applications with access to AC power: Boat lifts; Boat davits; Frame-straightening machines (to pull disabled vehicles up onto machine); Light towers; Marine railway systems; Greenhouse ventilation systems; Aircraft hangars (to pull small aircraft in and out); Opening/closing large horizontal sliding doors; Dumb waiters; General material handling applications. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Similar to 25727, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

CSA APPROVED 120 Volt Electric Winch with factory-installed remote control (handheld pendant switch with 10 ft cord) has 10 ft, 3-wire grounded power cord. 1800 lb capacity when double-lined using pulley block and hook (included). Comes loaded with 50 ft of 3/16 inch aircraft cable. Power in, power out, controlled freewheeling clutch, and automatic brake. Emergency crank handle also included in case of power loss. Similar to SA7015AC, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Similar to 25729, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Protect your vehicle bumper, tailgate, license plate, and your shins! Absorbs blow between coupler and towing vehicle when hook-up is misjudged. Slips onto the coupler flange, no tools required. Molded with U.V. inhibitor, resists deterioration and stays flexible in all kinds of weather. Fits most brands of Class 1, 2, 3, and 4 couplers.

1400 lb winch for horizontal pulling applications. High carbon steel gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Powder coated copper bronze finish. Handle included.

Combines the safety of a brake winch with the convenience of being able to freewheel when needed. When freewheel lever is engaged, cable can be pulled off manually to save time. When lever is disengaged, braking mechanism takes effect to lock load in place, even when handle is released. 2500 lb capacity, zinc TUFFPLATE finish. 175 lb minimum load required for winch to operate properly.

Model 6335 2 in. x 9 in. Guide-On Roller - Fits 1/2 in. Shaft

U-bolt style carrier with lock bracket... just add your own padlock for theft protection. Extra length to allow handling of wide tires and to fit wide tongues. For 8", 9", or 12" wheels. Fits 4 or 5-hole rims, zinc TUFFPLATE finish. Nuts also included.

Handy item that provides quick, safe, and reliable wire connection for all 12 volt DC StrongArm electric winch models and model TW9000. Can also be used with 12 volt remote switch kits. Fits 8 gauge wire. Splice mating connectors into wiring harness, so that wiring harness can remain wired to battery when trailer is not present. One connector can be attached to the bottom of the bumper, and the other goes with the winch (and the shorter section of red wire). When ready to use the winch again, just plug the two connectors together. Optional dust cover (24087) sold separately.

20 foot heavy duty winch strap with hook, with breaking strength of 6600 lbs, for winches up to 3700 lbs (strap rating must be 150% of winch rating). 2 inch width. Includes mounting hardware.