Dutton-Lainson Company

CSA APPROVED 120 Volt Electric Winch has 10 foot, 3 wire grounded power cord. 2700 lb capacity. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 25 ft of 7/32 aircraft cable. Emergency crank handle also included in case of power loss. Similar to SA9000AC, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

WATER-BLOCK spin-on canister absorbs water from gasoline and diesel fuel, and filters microscopic particles (10 microns) of rust, sand, dirt, scale and lint. Restricts fuel flow as water is absorbed, signaling the need for a canister change. Also can be used with biodiesel blends up to 20%. Zinc die-cast top cap with 3/4 inch NPT pipe fittings. Maximum recommended flow rate is 25 gpm. Working pressure up to 50 psi.

Similar to 24965, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Similar to standard model 595, but can be used with 100% biodiesel. BiO-FLO features include a nickel-plated top cap, special buna rubber gasket that resists swelling, and stainless steel internal element components. Disposable spin-on canister filters microscopic particles (10 microns) of rust, sand, dirt, scale and lint. Maximum recommended flow rate is 25 gpm. Working pressure up to 50 psi. Zinc die-cast top cap with 1 inch NPT pipe fittings.

Similar to standard model 595, but can be used with 100% biodiesel. BiO-FLO features include a nickel-plated top cap, special buna rubber gasket that resists swelling, and stainless steel internal element components. Disposable spin-on canister filters microscopic particles (10 microns) of rust, sand, dirt, scale and lint. Maximum recommended flow rate is 25 gpm. Working pressure up to 50 psi. Zinc die-cast top cap with 3/4 inch NPT pipe fittings.

Class 3 (5000 lb) A-frame Quick-Lock trailer coupler, powder coated black finish, fits on 2 inch ball. Includes hole for mounting jack through coupler. Exclusive features: -Easy to adjust without tools -Meets all requirements for SAE J684 & VESC V5 -Quick-Lock Ball Clamp assembly provides a precise fit for proper towing -Black Enamel coated finish for additional rust resistance

1500 lb brake winch for industrial use. Extra heavy duty construction for long life. Gear cover for enclosed braking mechanism, 2-1/2 inch reel hub diameter. Load locks in place when handle is released. Great for grain augers, boat lifts, pickup cranes, etc. Lift and lower with ease. 150 pound minimum load required for winch to function properly. Powder coated black reel, zinc TUFFPLATE base and hardware. Handle included. NOTE: For boat lift applications, handle may be replaced by large wheel (supplied by lift manufacturer).

Plastic top cap, fits jacks with 2 inch diameter outer tube. (6400 series boat trailer jacks)