Dutton-Lainson Company

3200 lb 2-speed winch for horizontal pulling applications. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, for heavier loads. Zinc TUFFPLATE finish. Handle included.

For 4-bolt mount jacks with 3/8 inch swivel pin. Appropriate for jacks up to 1500 lb capacity.

12 inch replacement handle for DLB-series brake winches where a longer handle is beneficial for more force. Ergonomic handle grip.

3500 lb 2-speed winch for horizontal pulling applications, with hand brake for manually-controlled load release. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, requiring less effort. Zinc TUFFPLATE finish. Handle included.

Vinyl dust covers to fit 3/4 inch Grease Keeper, 2 per pkg.

Swivel plate kit for 2-bolt mount jacks with 3/8 inch swivel pin. For jacks up to 1000 lb capacity.

8-1/4 inch ratching handle for DLB-series brake winches. When used in place of a regular handle, it allows operator to raise and lower load without turning handle a full revolution (where space is limited). Ratcheting action also provides better leverage for operator.

3500 lb 2-speed winch for horizontal pulling applications, with hand brake for manually-controlled load release. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, requiring less effort. Powder coated copper bronze finish, zinc TUFFPLATE hardware. Handle included.

7 inch removable handle kit fits all DLB-series brake winches. Spring loaded pin holds handle in place during use, and allows easy removal. Includes square tube hub that will allow operating winch with an electric drill, utilizing 6456 drill drive socket (sold separately).

Vinyl dust covers to fit 1 inch Grease Keeper, 2 per pkg.

Replacement swivel pin, spring, cotter pin, and washer. For use with D-L domestic jacks with capacities of 1000 lbs or less, manufactured since 1999. (Note: for jacks with a date code of 4398 or older, call factory to order kit 22452).

9-3/8 inch removable handle kit fits all DLB-series brake winches. Spring loaded pin holds handle in place during use, and allows easy removal. Includes square tube hub that allows winch to be operated with an electric drill when utilizing 6456 drill drive socket (sold separately).

Vinyl dust covers to fit 1-1/4 inch Grease Keeper, 2 per pkg.

For 4-bolt mount jacks with 1/2 inch swivel pin Appropriate for jacks up to 1500 lb capacity.

For the 4-bolt mount DLx-P tongue jack. 1/2 inch swivel pin. Swivel plate painted black.

Replacement handle for pop-up campers that have a DLB-series Dutton-Lainson brake winch installed in the interior of the frame, to be operated from outside by an extended handle. Includes drive hub assembly, which threads on to the winch drive shaft, with a 3 inch length of 1.25 inch square tubing welded to it; a 12.8 inch length of 1 inch square tubing welded to a winch handle; handle spring; and special hex nut.

Steel dust caps to fit 3/4 inch spindles.

Swivel plate kit for 2-bolt mount jacks with 1/2 inch swivel pin. For jacks up to 1000 lb capacity.

Use in combination with 6453 or 6454 removable handle kit to operate DLB-series brake winches with an electric drill. Socket fits 1/2 inch electric drill and slips into square tube hub supplied in 6453 and 6454 kits.

Steel dust caps to fit over 1 inch and 1-1/16 inch spindle sizes.

Steel dust caps to fit 1-1/4 inch spindles.

Replacement swivel pin, spring, cotter pin, washer, and pin grip. For use with D-L domestic jacks (does not fit import model 3400) equipped with 1/2 inch swivel pin....including models 6800, 6850, 6851, DLx, DLx-P, and black-painted ag jacks.

12-1/4 inch replacement handle for B-series brake winches, including B1200/B1202, B1500/B1502, B2500/B2502/B2503, and B3503. Ergonomic handle grip.