Dutton-Lainson Company

Ratcheting handle for DL1602A, DL1802A and DLx1900 pulling winches. Can be cranked in full circular revolutions. Can also be ratcheted for better leverage on steep boat ramps or from an awkward stance (such as trying to bring a boat in without getting your feet wet!). See video link on this page for a demonstration of how it works.. Note: Ratcheting action only works in one direction (pulling the line in), so this item needs to be used in applications where there is room to rotate the handle 360 degrees, in order to let the load out.

Similar to 25046, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

CSA APPROVED 120 Volt Electric Winch with factory-installed remote control (handheld pendant switch with 10 ft cord) has 10 foot, 3-wire grounded power cord. 4000 lb capacity when double-lined with pulley block and hook (included). Comes loaded with 50 ft of 7/32 inch aircraft cable. Power in, power out, controlled freewheeling clutch, and automatic brake. Emergency crank handle also included in case of power loss. Similar to SA12015AC but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Similar to 24962, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

2500 lb 2-speed winch for horizontal pulling applications. High carbon steel heat-treated gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip. Quick-attach handle allows easy change from high speed to low gear, for heavier loads. Zinc TUFFPLATE finish. Handle included.

1500 lb DC winch for boat trailer use - for boats up to 4000 lbs. Loaded with 2 inch x 20 foot web strap and snap hook. Power-in and free-wheel operation, with positive mechanical brake. Clutch control knob engages gears or releases load in a controlled freewheel mode. Note: In the event of a power loss, this model can be manually operated by using a 5/8 inch socket wrench. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

9-1/2 inch Quick-Attach replacement handle (no nut required). For DL1602ADD, DL1800A, DL2000A, DL2500A, DL3200A, DL3500B, and DLB1550A.

1500 lb DC winch for boat trailer use, with factory-installed remote control (handheld pendant switch with 10 ft cord) for boats up to 4000 lbs. Loaded with 2 inch x 20 ft web strap and snap hook. Power-in and free-wheel operation, with positive mechanical brake. Clutch control knob engages gears or releases load in a controlled freewheel mode. Note: In the event of a power loss, this model can be manually operated by using a 5/8 inch socket wrench. NOTE: Maximum run time 4 minutes. See owners manual for more details.