Dutton-Lainson Company

2000 lb worm gear winch with split drum, allowing cable to pull from opposite directions. Reel automatically stops turning whenever cranking is stopped, locking load in place. Powder coated copper bronze finish, permanently lubricated bearings. Handle included.

For 12 volt DC StrongArm electric winches. Includes heavy-duty 3-position rotary switch, 80 amp circuit breaker, 15 ft positive wire, 5 ft negative wire, and two 10 ft switch-to-winch wires. Switch can be mounted on vehicle dashboard for easy access. Plugs directly into winch switch pocket without rewiring.

2000 lb worm gear winch with split drum, allowing cable to pull from opposite directions. Loop drive can be operated by shepards hook, and if desired, by a variable speed power drill. Reel automatically stops turning whenever cranking is stopped, locking load in place. Powder coated copper bronze finish, permanently lubricated bearings.

Model 6377 Switch Pocket Replacement Kit for all SA-series DC electric winches. Includes pocket plate top and bottom, housing shunt spring, bottom contact stud, contact stud with groove, 4 lock washers, 2 machine screw nuts, and 2 lock nuts.

2000 lb Worm Gear Winch with 5/8 inch hex drive. Comes with mating handle that can be removed easily without tools. Also allows the winch to be operated with a power drill hooked directly to the drive shaft. Cable capacities: 7/32 in (up to 82 ft)... 1/4 in (up to 59 ft)... 9/32 in (up to 49 ft). Smaller or larger cable diameters are not recommended.

Dynamic brake remote control for 120 volt AC StrongArm electric winches. Dual switch controls in/out and off/run. Provides dynamic braking function to supplement mechanical brake on winch, bringing load to an immediate halt without coasting. 10 foot cord length.

Designed for PWC trailer applications. 12 ft strap with hook includes 1 inch x 18 inch loop. Steel hook has a tensile strength of 3750 lbs. Packed with 1/4 x 2-1/2 mounting bolt and locknut.

12 Volt Electric Winch is powered by your vehicle battery, using wiring harness (included). Power in, power out, controlled free wheeling clutch, and automatic brake. 1500 lb. load capacity. Comes loaded with 20 ft of 3/16 aircraft cable, and snap hook. Emergency crank handle also included in case of power loss. DC Winches are great for mobile applications, or around water. Mount on ATV’s; Race car trailers (also for moving extra tires); Antique car trailers; Boat trailers; Hay bale moving; Livestock feeding equipment; Large livestock trailers; Boat lifts; Articulating conveyors. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.