Dutton-Lainson Company

7 x 19 galvanized aircraft cable, 5/16 in x 25 ft, with safety hook. Suitable for use on D-L hand winches up to 2500 lb capacity, and electric winch models SA9000 and SA12000.

Pulley block with hook, for use in double line operation of electric winches. Will accept cable sizes up to 3/8".

1500 lb worm gear winch with regular drum, and handle drive. Reel automatically stops turning whenever cranking is stopped, locking load in place. Powder coated copper bronze finish, permanently lubricated bearings. Handle included. Will hold up to 81 ft of 3/16 cable, or 61 ft of 7/32 cable, or 43 ft of 1/4 cable. Cable sizes smaller or larger than these are not recommended.

Pulley block with swivel hook, for use in double line operation of electric winches. Will accept cable sizes up to 3/8".

1500 lb worm gear winch with regular drum, and loop drive. Reel automatically stops turning whenever cranking is stopped, locking load in place. Powder coated copper bronze finish, permanently lubricated bearings.

Pulley block only, no hook. Used for double line operation of electric winches. Will accept cable sizes up to 3/8".

Forged snap hook with safety latch. Tensile strength 7500 lbs.

1500 lb worm gear winch with split drum, allowing cable to pull from opposite directions. Loop drive can be operated by shepards hook, and if desired, by a variable speed power drill. Reel automatically stops turning whenever cranking is stopped, locking load in place. Powder coated copper bronze finish, permanently lubricated bearings.