Dutton-Lainson Company

Brake winch safety and rugged construction at a more economical price. Raise and lower loads with minimal effort, with load locked in place, even when handle is released. 1200 lb capacity, zinc TUFFPLATE finish. 50 lb minimum load required for winch to operate properly. Handle included.

Pair of 5/16 inch vinyl-coated cables with safety hooks at one end. Provides added towing safety, and vinyl coating prevents rusting. Coil tension eliminates dragging and rattles. Cables extend to 40 inches when straightened. For trailers up to 6500 lbs. Meets SAE and V-5 standards. IMPORTED.

INTERCHANGEABLE Coupler ball, includes 1-7/8 in and 2 inch balls. Two internally threaded balls share the same 3/4 inch shank. Change back and forth between sizes quickly and easily. No need to have two separate balls. Polished chrome finish. 3/4 shank size, but includes adaptor to fit 1 inch hole. IMPORTED.

Deluxe 5-foot roller bunks (pair) attach directly to 2 x 4 bunk boards, or can be mounted with 6389 brackets (sold separately). A quick, easy and inexpensive way to upgrade bunk trailers to rollers. 12 gauge steel, galvanized finish, rubber rollers. For boats weighing up to 3000 lbs. The advantage of this style of roller bunks is that each set of rollers is wider (3 rollers instead of 2), providing more contact with the boat. The rollers on this style of bunk do not have wobble capability for self-alignment like model 6355 does. The rated capacity is based on having good contact with all of the rollers, and a reasonably even distribution of weight on the rollers. Rollers must be in contact with straight sections of the boat hull. It is critical to avoid a very large load on the first set of rollers during the unloading and loading process. The boat should float at least part way onto the trailer before contacting rollers, so that all of its weight is not concentrated on the first set of rollers. A concentrated load can crush a single set of rollers, with the potential for damage to the boat hull.

1-1/4 inch spindle O.D., 2.328 outer hub I.D. Cone nbr LM67048, cup nbr LM67010. Includes 2 bearings with races, 1 grease seal, and cotter pin. IMPORTED.

Replacement 6 inch diameter wheel for D-L jacks with capacities of 800 to 1200 lbs. Tough polypropylene resists flat spots and cold weather cracking. Includes axle bolt and nut, and bushing if required.

Model 6709 Swivel tongue jack for applications where a taller jack is advantageous. Similar to model 6400, but with 12 inches of travel, versus the standard 10 inches. For tongues up to 29 inches from the ground. Zinc TUFFPLATE finish. Fits tongues up to 3 x 5 inches.

Model 6634 swivel Ag-Industrial jack, top wind, with 15 inch travel. Includes weld-on bracket and snap ring. 2000 lb capacity. Powder coated black finish.