home | products | search | checkout | contact | returns  
 
  PRODUCTS    













Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout


Recently Viewed

Copyright © 2009

 

Home » Winches » Electric Winches

 Checkout

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | »

SA9000AC 

Part Number: 24872

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

120 Volt Electric Winch has 10 foot, 3 wire grounded power cord. 2700 lb capacity. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 25 ft of 7/32 aircraft cable. Emergency crank handle also included in case of power loss. For applications with access to AC power: Boat lifts; Boat davits; Frame-straightening machines (to pull disabled vehicles up onto machine); Light towers; Marine railway systems; Greenhouse ventilation systems; Aircraft hangars (to pull small aircraft in and out); Opening/closing large horizontal sliding doors; Dumb waiters; General material handling applications. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, SEE ITEM 24951.
Price: $449.99

SA9000AC, without clutch 

Part Number: 24951

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

Similar to 24872, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people or loads over where people could be present.
Price: $449.99

SA9000AC CSA APPROVED 

Part Number: 24965

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

CSA APPROVED 120 Volt Electric Winch has 10 foot, 3 wire grounded power cord. 2700 lb capacity. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 25 ft of 7/32 aircraft cable. Emergency crank handle also included in case of power loss. Similar to SA9000AC, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. .
Price: $479.99

SA9000AC CSA, without clutch 

Part Number: 24976

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

Similar to 24965, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present.
Price: $479.99

SA9015AC W/6349 REMOTE 

Part Number: 25019

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

120 Volt Electric Winch with factory-installed remote control (hand held switch pendant with 10 foot cord) has 10 foot, 3 wire grounded power cord. 2700 lb capacity. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 25 ft of 7/32 aircraft cable. Emergency crank handle also included in case of power loss. For applications, with access to AC power: Boat lifts; Boat davits; Frame-straightening machines (to pull disabled vehicles up onto machine); Light towers; Marine railway systems; Greenhouse ventilation systems; Aircraft hangars (to pull small aircraft in and out); Opening/closing large horizontal sliding doors; Dumb waiters; General material handling applications. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. .
Price: $479.99

SA9015AC, without clutch 

Part Number: 25020

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

Similar to 25019, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present.
Price: $479.99

SA9015AC W/REMOTE CSA APPROVED 

Part Number: 25021

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

CSA APPROVED 120 Volt Electric Winch with factory-installed remote control (hand-held pendant switch with 10 ft cord) has 10 ft, 3-wire grounded cord. 2700 lb capacity. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 25 ft of 7/32 inch aircraft cable. Emergency crank handled also included in case of power loss. Similar to SA9015, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. .
Price: $509.99

SA9015AC CSA, without clutch 

Part Number: 25027

Details 

Dimensional Drawing

Manual

Repair Parts

Specifications and Model Comparison

Warranty

Similar to 25021, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present.
Price: $509.99

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | »


Products :
- Air Cleaners / Funnels
- Anchors
- Cargo Management
- Couplers / Accessories
- Grease Guns / Cartridge
- Fencing Tools
- Fuel Tank Filters
- Oil Cans
- Repair Parts
- Tongue Jacks
- Trailer
- Wheel Bearings
- Winches











DUTTON-LAINSON COMPANY
451 WEST SECOND STREET
(402)462-4141
dlsales@dutton-lainson.com

   

home | products | search | checkout | contact | sitemap