Dutton-Lainson Company

1500 lb worm gear winch with split drum, allowing cable to pull from opposite directions. Loop drive can be operated by shepards hook, and if desired, by a variable speed power drill. Reel automatically stops turning whenever cranking is stopped, locking load in place. Powder coated copper bronze finish, permanently lubricated bearings.

Remote switch from part #24054 only. For 12-volt DC StrongArm electric winches. Provides 10 foot remote handheld switch unit for wiring directly to winch. Pendant has 3-position In-Off-Out switch. Due to a plug design change in 2014, a separate female plug is included for winches manufactured earlier.

1500 lb Worm Gear Winch with 5/8 inch hex drive. Comes with mating handle that can be removed easily without tools. Also allows the winch to be operated with a power drill hooked directly to the drive shaft. Cable capacities: 3/16 in (up to 81 ft)... 7/32 in (up to 61 ft)...1/4 in (up to 43 ft). Smaller or larger cable diameters are not recommended.

25 ft remote switch for 12-volt DC StrongArm electric winches. Provides 25 foot remote handheld switch unit for wiring directly to winch. Pendant has 3-position In-Off-Out switch. Due to a plug design change in 2014, a separate female plug is included for winches manufactured earlier.

1500 lb Worm Gear Winch with 5/8 inch hex drive, and split drum, allowing cable to pull from opposite directions. Can be operated by cordless drill with 5/8 inch socket, or by socket-head handle (included). Bronze powder-coated finish. Permanently lubricated bearings.

For 12 volt DC StrongArm electric winches. Permits user to operate winch from location up to 10 feet away. Control box mounts on or next to winch and plugs directly into winch switch pocket without rewiring. Durable handheld pendant switch can be unplugged for safe storage.

2000 lb worm gear winch with regular drum, and handle drive. Reel automatically stops turning whenever cranking is stopped, locking load in place. Powder coated copper bronze finish, permanently lubricated bearings. Handle included. Will hold up to 82 ft of 7/32 cable, or 59 ft of 1/4 cable, or 49 ft of 9/32 cable. Cable sizes smaller or larger than these are not recommended.

Accessory for use with 6349 and 6372 remote switches on StrongArm 115 volt AC electric winches. Allows user to quickly and easily remove remote for storage and added security when needed. Also replaces plug on 12 volt DC winches with remote, and 6371 DC remote switch kit.